Headbanger Figure with Solar Powered Moving Head and Arms
The original DigiFidget!
Our little rocker was our first design and took a long time to get it all dialed in, but we learned a lot. He waves his hands in the air like he just don't care. He doesn't actually sync to the music in the room, but he's designed to match the general tempo of rock music.
This page includes 3D models you can download and print to test your settings and filament preferences. When you're ready, just order one of our Circuit Kits, install it in your figure and rock out!
If you don't have a 3D printer, you'll need to find someone who does! We currently only sell the circuit kit that powers it.
The body and head print together on this model. There is also a separate cover plate that goes on the bottom.
All parts are assembled by snapping parts together. The bottom cover plate snaps on to the body and the circuit kit components all snap into place as well. No tools, adhesives or soldering required.
STL files: Body, Cover plate
Print time on Bambu H2D with single AMS: 4 hours
Bambu .3mf file with all parts, painted, with supports: Headbanger Assy 25.3mf (right-click and save-as to download)
Recommended Bolt: M8-1.25 x 40mm metric hex head cap screw, zinc plated steel (not included in kit)
Recommended Colors: Bone white skin, Black everything else
3D Print Pendulum Circuit Kit - PRE-ORDER ONLY
$12.95
>> Available for Pre-Order only. Kits will be available in November 2026 <<
Our patent-pending Circuit Kit is what powers DigiFidgets and one is required for each completed assembly. You can 3D print one of our models, or download and print one from a third party designer, or design and print your own using our Design Guide. Then you can install our Circuit Kit to make it move!
Each circuit kit includes a solar cell, printed circuit board (PCB), a copper wire coil mounted to its own circuit board for convenience, a strong neodymium magnet, all pre-soldered and assembled so all you need to do is install it in your 3D printed figure.
