Rubber Duck Digifidget with Solar Powered Moving Head
Download and print a Rubber Duck with a moving head!
We 3D-scanned an actual rubber duck and created a Digifidget from it! He's about 3 inches tall just like the real one. The head nods up and down using the solar cell in his tail.
Below are links to 3D models of the Rubber Duck that you can download and 3D print on your own printer. When you're happy with the results, order one of our Circuit Kits to install in your print and make his head nod!
If you don't have a 3D printer, you'll need to find someone who does! We currently only sell the circuit kit that powers it.
The body and head print separately to cut down on support and stray filament removal. There is also a separate cover plate that goes on the bottom.
All parts are assembled by snapping parts together. The head and bottom cover plate snap on to the body and the circuit kit components all snap into place as well. No tools, adhesives or soldering
STL files: Body, Head, Cover plate
Print time on Bambu H2D with single AMS: 5.5 hours
Bambu .3mf file with all parts, painted, with supports: RUBBER DUCK 18.3mf (right-click and save-as to download)
Recommended Bolt: M8-1.25 x 16mm metric hex head cap screw, zinc plated steel (not included in kit)
Recommended Colors: Yellow body, Orange bill, Black eyes
3D Print Pendulum Circuit Kit - PRE-ORDER ONLY
$12.95
>> Available for Pre-Order only. Kits will be available in November 2026 <<
Our patent-pending Circuit Kit is what powers DigiFidgets and one is required for each completed assembly. You can 3D print one of our models, or download and print one from a third party designer, or design and print your own using our Design Guide. Then you can install our Circuit Kit to make it move!
Each circuit kit includes a solar cell, printed circuit board (PCB), a copper wire coil mounted to its own circuit board for convenience, a strong neodymium magnet, all pre-soldered and assembled so all you need to do is install it in your 3D printed figure.
