Santa Claus Figure with Solar Powered Moving Head, Arms and Torso
Our Santa figure is ready just in time for the holidays! His hat, head, arms and entire upper body swing back and forth at the hips like he's having a big belly laugh. No batteries - he's powered by the solar cell in the base that he stands on.
Below are 3D printable files you can download and print with your own settings, filaments and colors. Once you've got it dialed in, order one of our Circuit Kits to bring him to life!
If you don't have a 3D printer, it's time to make friends with someone who does! We currently only sell the circuit kit that powers it.
The upper body and legs/stand print separately. There is also a separate cover plate that goes on the bottom.
All parts are assembled by snapping parts together. The upper body snaps on to the legs/stand, as does the bottom cover plate. During assembly, the coil wires are run from the stand up the slot in the back of his right leg to the coil position so that no tools, adhesives or soldering is required.
Santa Claus Upper Body STL file
Santa Claus Legs/Stand STL file
Santa Claus Bottom Cover Plate STL file
Print time on Bambu H2D with single AMS: 15.5 hours (lots of filament changes)
Bambu .3mf file with all parts, painted, with supports: SANTA 16.3mf (right-click and save-as to download)
Recommended ballast bolt: M8-1.25 x 16mm metric hex head cap screw, zinc plated steel (not included in kit)
Recommended filament: PLA
Recommended colors: Metallic Bronze main fur, Chocolate hair, Bone White horns and eyes, Black hooves pupils and nostrils, Army Beige snout.
How-to Assemble Video (not yet)
3D Print Pendulum Circuit Kit - PRE-ORDER ONLY
$12.95
>> Available for Pre-Order only. Kits will be available in November 2026 <<
Our patent-pending Circuit Kit is what powers DigiFidgets and one is required for each completed assembly. You can 3D print one of our models, or download and print one from a third party designer, or design and print your own using our Design Guide. Then you can install our Circuit Kit to make it move!
Each circuit kit includes a solar cell, printed circuit board (PCB), a copper wire coil mounted to its own circuit board for convenience, a strong neodymium magnet, all pre-soldered and assembled so all you need to do is install it in your 3D printed figure.
